Erection Wrench, for U.S. Heavy Nut
• Forged from select alloy steel to withstand high-leverage and heavy loads.
• Extra-heavy-duty head area gives maximum strength and durability.
• Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or
hole sizes without binding.
• Extra-large hub area works on larger diameter holes than other wrenches.
• Catalog number, bolt size and nominal opening size are stamped on every wrench for easy
identification.
• American Bridge design.
|
 |
| Cat. No |
Bolt Size |
Head Width |
Nominal Opening |
Nut Type |
Overall Length |
Taper Diameter |
Weight (lbs.) |
| 3212 |
3/4" |
2-1/2" |
1-1/4" |
U.S. heavy |
16-5/8" |
1" to 1/4" |
1.98 |
| 3213 |
7/8" |
3" |
1-7/16" |
U.S. heavy |
17-3/8" |
1-1/8" to 9/32" |
2.72 |
| 3214 |
1" |
3-5/8" |
1-5/8" |
U.S. heavy |
18" |
1-1/8" to 1/4" |
3.36 |
| |
|
|
|
|
|
|
|
|
|
|
Drive Ratcheting Construction Wrench
• Accepts 1/2" square-drive hex socket.
• Reversible ratchet.
• Eliminates the need for carrying several fixed-size wrenches.
• Forged from select alloy steel with continuous-taper handle for aligning bolt holes.
• Industrial black finish for corrosion resistance.
| Cat. No |
Length |
Maximum Size |
Weight (lbs.) |
| 3238 |
15" (381) |
15" (381) |
2.10 |
| 3239 |
16" (406) |
1-1/2" (38) |
2.36 |
| |
|
|
|
|
 |
| Back To Index |
|
Round Bar
• Provides extra leverage when positioning steel members and aligning bolt holes.
• Forged fit-up bar is pointed on one end.
• Chisel-end is at a 15° angle to give even greater leverage
| Cat. No |
Diameter |
Length |
Weight (lbs.) |
| 3247 |
3/4" (19) |
24" (610) |
2.50 |
| 3248 |
7/8" (22) |
30" (762) |
4.30 |
| |
|
|
|
|
 |
|
|
Bull Pin, Broad Head
• Forged, heat-treated bull pin increases efficiency by providing a larger striking surface.
• Head design also reduces chance of pin slipping from the hand when aligning holes.
• Angled head and smooth blending of radii increase strength and reduce the danger of chipping.
• Below the head, squared-off shoulders have been forged to provide a surface for applying
wrench to loosen wedged bull pins.
• Long, even taper reduces binding and hang-up.
• Added resistance to "mushrooming" permitting much longer use than is possible with
conventional designs.
• Heat-treated for strength.
• Black finish for rust resistance.
| Cat. No |
Length |
Point Diameter |
Top Diameter |
Weight (lbs.) |
| 3255 |
13-3/4"
(349) |
5/16"
(8) |
1-1/4"
(32) |
2.90 |
| 3256 |
10"
(254) |
1/4"
(6) |
1-1/16"
(27) |
1.60 |
|
 |
| Back To Index |
|
Barrel-Type Drift Pin
• Machined from quality alloy steel.
• Tapers are uniform and blend into body diameter.
• Tough, forged steel will properly end-pein in use.
• Heat-treated for strength.
• Black finish for rust resistance
| Cat. No |
Maximum
Diameter |
Overall
Lenght |
Point
Diameter |
Weight (lbs.) |
| 3260 |
11/16"
(18) |
7-1/2"
(191) |
5/16"
(8) |
.60 |
3261
|
13/16"
(21)
|
8"
(203)
|
7/16"
(11)
|
.85 |
|
 |
Back To Index |
